Kadee - RC Logo

#11100 G-Scale Basic Remote Coupler Starter Kit

Patent Numbers 7,810,660 & 5,775,524

Designed for use with Freight & Passenger cars.
Basic Remote Coupler Starter Kit will help you to get started with Kadee-RC Remote uncoupling system. The Kit includes the necessary components to convert both ends of one Freight or Passenger car to Remote Couplers. The #11115 Coupler Kit that is included, includes a standard size servo (that will need to mounted inside the car where space allows) to operate the body mounted #906 couplers. The car can be setup to remotely operate a single coupler or both couplers simultaneously. The #11110 Receiver Kit that is included mounts anywhere space allows.

Your Kadee-RC Remote Couplers will operate and function with standard Kadee® G-Scale Couplers. The Remote Couplers will operate with the Kadee-RC #11215 Hand-Held Transmitter that is included or operate over Kadee® Magnetic uncouplers.

Note: The #11110 Receiver Kit is equipped with a On-board 250mA Relay for lighting or other remote switching needs.


1 - #11215 Hand-Held Transmitter (1 - Hand-held Transmitter)

1 - #11110 Receiver Kit (1 - Receiver Module, 1 - 4 cell AA Battery Holder, 1 - Wire Harness, 1 - Fuse & Fuse Holder)

1 - #11115 Body Mount Coupler Kit (G-Scale) - (2 - #906 G-Scale Coupler & Body Mount Gearbox (individual)(Assembly Required), 2 - Trip Pin Linkage Collars, 2 - Short Linkage Rods, 1 - Long Linkage Rod, 2 - #841 Shims, 1 - Mounting Screws & Hardware), 1 - #11120 Standard Servo Kit (1 - Hitec (HS-311) Servo, 1 - Vertical Servo Tray - for Hitec (HS-311) , 1 - Mounting Hardware)

Coupler Conversion Info

You must first identify the locomotive or rolling stocks manufacturer and type before looking the product up on the Kadee-RC Coupler Conversion List. Use the Kadee-RC Coupler Conversion List to lookup our suggested Kadee-RC coupler for the particular model. (Our conversions typically requiring the least modification to a model).


Always check the G-Scale coupler heights with our #980 Coupler Height Gauge.

Batteries Not Included

Powering the Receiver from any other power source will void the warranty.

#11100 Basic Remote Coupler Starter Kit (G-Scale) 1 Kit

Out of Stock

Dealers: Kadee® RC products are at second tier pricing.

- Quick Start

- Transmitter User Guide

- Body Mount Coupler Assembly Instructions

- Body Mount Remote Uncoupler Kit Installation Instructions

* Limited uncoupling on curves.
Some cars may require additional modification that the Basic Starter Kit is not equipped to convert.
Use our #880 or 980 G-Scale Height Gauge to check for the correct coupler height and trip pin clearance.
Kadee® RC Transmitter & Receivers are FCC & IC Compliant.
Kadee® is restricted to selling & exporting products containing Kadee® RC Transmitter & Receivers in the USA and Canada.
Kadee® RC Transmitter & Receivers are not for use outside of USA and Canada. (Per Governmental FCC Regulations)


Garden Trains: Kadee RC - Remote Control Couplers for Large Scale Trains

This is an information overview of the Kadee #11100 Basic Starter Set. See what is included and how you set up the parts to control a Kadee coupler.

Garden Trains: Kadee Remote Uncoupling - Installing the 11100 Starter Kit

How to install a #11100 Basic Starter Kit or #11115 Body Mount Coupler Kit & #11110 Receiver Kit on a USA Trains Boxcar.

Garden Trains: Quick Instructions for Installing Kadee Remote Couplers - Kit #11100

Learn how easy it is to install Kadee Remote Couplers provided with #11100 Basic Starter Kit or #11115 Body Mount Coupler Kit on a USA Trains Boxcar.


#11215 Hand-Held Transmitter


#11110 Receiver Kit


#11115 Body Mount Coupler Kit (G-Scale)

(Long Linkage Rod, Mounting Screws & Miscellaneous Hardware not shown.)

#11120 Standard Servo Kit

(Mounting Hardware not shown.)




Remote Uncoupling
Stop car(s) on desired track, allowing slack to occur between the couplers. Press the on the transmitter and open the remote coupler**.
The remote coupler draws itself apart, uncoupling them.
Withdraw to disengage couplers, leaving uncoupled car(s) on desired track. Press the on the transmitter and closing the remote coupler**.
* Limited uncoupling on curves.
** The receiver that controls coupler must be addressed, before it can receive commands from transmitter.